home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1996 #15
/
Monster Media Number 15 (Monster Media)(July 1996).ISO
/
bbs_game
/
survey14.zip
/
SURVEY.DOC
< prev
next >
Wrap
Text File
|
1996-06-12
|
29KB
|
652 lines
S U R V E Y
v1.4
by
Al Lawrence
Sunrise-80 BBS
(404) 256-9525 (USR 33.6)
(404) 705-9104 (USR 33.6)
(404) 256-9518 (Voice, 9am-9:30pm EST)
(Email) al_lawre@ix.netcom.com
OVERVIEW
________
SURVEY will allow the Sysyop to set up questionaires that will be presented
to their callers. Callers respond to the questionaires and the responses are
tabulated and the reults are made available for viewing. The user will have
the opportunity to enter freeform remarks for each question.
NOTE: Most errors will be logged to a file called DFRAME.ERR which is
created in the directory you run the door from.
NON-REGISTERED R E S T R I C T I O N S
----------------------------------------
° Keyboard timeout value limited to 2 minutes
° Not able to reset questionaire thru maintenance program
° Maximum number of users allowed: 15
INSTALLATION
____________
Installation is fairly easy and straight-forward. The following steps and
examples should have you up and running in a very short period of time.
It is assumed that you are familiar with setting up DOORS on your system.
To this end, only examples of the configuration file and Door batch file
are described.
1) Create a directory to hold all SURVEY files
2) Unzip SURVEYxx.ZIP into the the above directory
3) Create a configuration file, with a name of your choice, or
modify the supplied SURVEY.CFG file. A description follows:
** Location of system file (See Below)
SUNRISE-80 BBS Your BBS Name
Al Sysop's First nameAP
Lawrence Sysop's Last Name
|-----------------------------------------------------------------------------|
| READ! 1 CommPort \ These 2 lines are required |
| READ! 1 Node # / ONLY for GTUSER.BBS |
|-----------------------------------------------------------------------------|
00000000 Registration Number
# 2 Keyboard timeout value in Minutes
! # 5 Maximum # of Accesses per day
(Sysop gets 99 in Registered version)
! # 0 Time Allowed in Door
(Sysop = Time Remaining - REG. VERSION)
N Y = Force Caller to respond to
Instructions <y/n). May need this with
Digiboards.
N = Allow caller to press ENTER in
response to Instructions <y/N>
1 1 = DO NOT Display ADOPT-A-DOOR Message
2 = Display ADOPT-A-DOOR message
N Y = Use Alias for LogonName. This will
require that you use DOOR.SYS
N = Use Normal BBS Logon Name
Y Y = Allow Users to be displayed. This is
option 3 on the Main Menu.
N = Do not allow access to this option
# 0 Survey #1 Expiration Date (YYMMDD)
0 Security level associated with Survey #1.
If = 0 then all levels can access survey.
# 0 Survey #2 Expiration Date (YYMMDD)
0 Security level associated with Survey #2.
If = 0 then all levels can access survey.
# 0 Survey #3 Expiration Date (YYMMDD)
0 Security level associated with Survey #3.
If = 0 then all levels can access survey.
# 0 Survey #4 Expiration Date (YYMMDD)
0 Security level associated with Survey #4.
If = 0 then all levels can access surve4y
# 0 Survey #5 Expiration Date (YYMMDD)
0 Security level associated with Survey #5.
If = 0 then all levels can access survey.
# 0 Survey #6 Expiration Date (YYMMDD)
0 Security level associated with Survey #6.
If = 0 then all levels can access survey.
# 0 Survey #7 Expiration Date (YYMMDD)
0 Security level associated with Survey #7.
If = 0 then all levels can access survey.
# 0 Survey #8 Expiration Date (YYMMDD)
0 Security level associated with Survey #8.
If = 0 then all levels can access survey.
# 0 Survey #9 Expiration Date (YYMMDD)
0 Security level associated with Survey #9.
If = 0 then all levels can access survey.
# 0 Survey #10 Expiration Date (YYMMDD)
0 Security level associated with Survey #10.
If = 0 then all levels can access survey.
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
@ # XXXX/YYYY Blackout Range From/To
@ # XXXX/YYYY Blackout Range From/To
@ # XXXX/YYYY Blackout Range From/To
@ # XXXX/YYYY Blackout Range From/To
@ # XXXX/YYYY Blackout Range From/To
Y Y = Allow callers to enter freeform
comments to each question
N = No comments allowed. You would use
this option if you were concerned
about the type of language that
might be entered.
Y Y = Log all callers to USAGEx
N = Do not log callers
** = Replace with ONE of the following:
C:\bbs\PCBOARD.SYS <- For PCBoard systems using PCBOARD.SYS only
C:\BBS\CALLINFO.BBS <- For Wildcat! systems (prior to v3.0)
C:\BBS\DOOR.SYS <- For ANY systems that support DOOR.SYS
C:\BBS\DORINFOx.DEF <- For ANY systems that support DORINFOx.DEF
C:\BBS\SFDOORS.DAT <- For Spitfire systems.
c:\bbs\TRIBBS.SYS <- For TriBBS systems.
C:\BBS\GTUSER.BBS <- For GT Power
* if using this option you must put the
ComPort # on line 5 and the Node # on
line 6 of the configuration file
# = Requires registration to change to a different value.
! = See "Plays Per Day/Door Time" Below
@ = See "Blackout Periods" Below
NOTE: There are NO Blank Lines in the Config File!!
4) Create a batch file or modify the SURVEY file supplied. A
description of this file follows:
ECHO off
cd\BBS\DOORS\SURVEY Location of SURVEY files
SURVEY SURVEY.CFG EXE filename and CFG filename (Name
used in creating file in #3 above)
CD\BBS
BOARD
5) When running in more than one node, be sure to supply a
different configuration name for each node (or see below).
6) If running with a Fossil-based multi-port board add
/FD to the line containing the CFG name as follows:
SURVEY SURVEY.CFG /FD
TROUBLESHOOTING
---------------
(1) If you are running this Door on a 486 system and encounter errors such as
ERROR 6.... OVERFLOW Error
ERROR 5.... ILLEGAL Function Call (may be associated with other problems)
KEYBOARD Timeout after 5 minutes
You may have to put the following line in your AUTOEXEC.BAT file:
SET NO87=ON
(2) If you encounter an Error 62 (Input Past End of File), BEFORE you see the
opening screen of the Door, your problem will more than likely be associated
with the CFG file. The error 62 means that you do not have enough entries
in the CFG. Compare your CFG file with the CFG definition in the DOC file.
(3) If you encounter an ERROR 70... Permission Denied, this will more than
likely mean that you DO NOT have SHARE loaded. SHARE is a DOS file that
comes with your version of DOS. To load it type the word SHARE at the DOS
prompt. To load it permanently type the word SHARE on a line by itself in
your AUTOEXEC.BAT file, any place prior to the loading of your BBS
software. There have been numerous reports that loading SHARE high causes
some problems, so to be on the safe side, do not load it high.
Should you have any questions or problem, please do not hesitate to call
voice for immediate help... 404-256-9518 (9am-9:30pm EST) any day!
USAGE LOG
---------
As an option, we provide you with the ability to log every player to a text
file. IF you enter Y in the CFG file to log callers, the Door will place the
caller's name as well as the ON and OFF times each time a caller selects the
Door. A separate file will be created for each Node and the name of the file
will be USAGEx, where x is the Node number.
You may delete these files at any time and the Door will recreate them the
next time a caller enters the Door. If you do NOT want to continue logging
callers, change the CFG file entry to N.
SURVEY QUESTION FILES
---------------------
The Survey questionaires can be named anything you wish. When creating
a Survey you will place the name of the Survey in the SURVEY.MNU file
on the same line as the questionaire title separated by a comma.
Example: What you think about the health care issue,SURVEY2.TXT
See Sample SURVEY.MNU that comes with this Door for more examples.
The questionaires are constructed as follows. See 3 sample
questionaire files that come with this door for more examples.
---------------------------------------------------------------
You may have up to 10 SURVEYS.
You may have up to 25 questions per SURVEY.
Each question can contain a maximum of 5 lines, 75 characters per line
Each question can have up to 14 answers. Each answer can contain
a MAXIMUM of 50 characters.
The following is an explanation of how to set up this file:
25 <number of questions in this file
1 <number of lines in the 1st question
10 <number of answers
How old are you? <question line 1
Less than 18 years old <answer A
18 - 20 years old <answer B
21 - 25 years old <answer C
26 - 28 years old <answer D
29 - 32 years old <answer E
33 - 38 years old <answer F
39 - 43 years old <answer G
44 - 49 years old <answer H
50 - 60 years old <answer I
Over 60 years old <answer J
2 <number of lines in the 2nd question
3 <number of answers
"Now honestly, did you tell the whole truth on the"
"questionnaire, and nothing but the truth so help you God?"
"Yes, I told the whole truth"
A few lies never hurt anyone
I told mostly the truth
etc
etc
- - - - - - - - -- - - - - --
In the above example the first line is the total number of
questions contained in the file.
Line 2 is the number of lines in the first question.
Line 3 is the number of answers listed for the question.
Line 4 is the first question in the file.
Lines 5 to 13 are the answers for the first question
The last 7 lines break down as follows:
Line 1 states that this question has two lines.
Line 2 states that there are 3 answers listed
Line 3 is the first line of the question.
Line 4 is the second line of the question.
Line 5 is the first answer.
Line 6 is the second answer.
Line 7 the third and last answer.
The shorter the question the better. One liners are the
best, five lines are the limit!
SURVEY MAINTENANCE PROGRAM
---------------------------
The Survey maintenance program (SURVMANT) is to be used to validate a
given SURVEY questionaire and/or to reset all or individual Surveys.
To execute: SURVMANT Survey.CFG
When validated, the program will check the following and report an
error if invalid:
(1) Ensures exisitance of the Surveyn file
(2) Checks for no more than 25 questions
(3) Checks for no more than 14 choices per question
(4) Checks for no more than 5 lines per question
(5) Checks lenght of each question line to ensure not greater
then 75 characters
(6) Checks the length of each choice to ensure that it does not
exceed 50 characters
BLACKOUT PERIODS
________________
Use the Blackout ranges option to define up to 5 time periods during
which you DO NOT want the Door to be played. If a caller tries to access
the Door during the Blackout period, they will be shown a message that
contains ALL the Blackout periods you have defined, and to try the Door
at a later time.
Each of the 5 Blackout ranges takes the form of XXXX/YYYY, where
XXXX=beginning time and YYYY=the ending time. For example, 0930/1230
means to NOT allow the Door to be played between 9:30am and 12:30pm.
IMPORTANT: - All times must be 4 digits & must follow the XXXX/YYYY format
- DO NOT change the XXXX/YYYY entry UNLESS you want to assign
a Blackout range.
- You MUST use the MILITARY time format. Example: 2030=8:30pm
0900=9am, 0030=12:30am, 1700=5pm, etc.
PLAYS Per DAY/DOOR Time
_______________________
Plays Per Day and Door Time can be controlled several ways:
(1) You can use the Games Per Day, singular option, in the config
file above. This option, will affect ALL callers whose Security
Level is NOT defined in any of the 10 optional Security Level/
Plays Per Day entries in the config file.
(2) You can use the Door Time, singular option, in the config file
above. This option, will affect ALL callers whose Security
Level is NOT defined in any of the 10 optional Security Level/
Plays Per Day/Door Time entries in the config file.
(3) You can restrict the number of games a specific Security Level
will be allowed to play per day or REWARD specific Levels with
more Plays Per Day.
Likewise, you can restrict the Play time for a specific Security
Level or REWARD specific Levels with more Door Time.
These options are handled by the use of the 10 config
entries (000=00/00).
The format of each entry is as follows:
XXX=YY/ZZ where XXX is the Security Level (must be 3 digits)
where = is a constant and MUST be included
where YY is the # of games per day (must be 2 digits)
where / is a constant and MUST be included
where ZZ is num. minutes per Door entry (must be 2 digits)
If the callers Security Level is NOT defined, his/her Plays Per
Day and Door Time will be controlled by the values in items
(1) and (2), above, respectively..
You may define up to 10 Security Levels. All unused entries must
be defined as 00=00/00
--------------------------------------------------------------------
Example: Suppose you had 3 Security Levels defined on your BBS as
(20=Subscriber, 30=Visiting Sysop, 40=CoSysop, 90=Friend) and you
wanted to set Plays Per Day as : Subscriber=5
Visiting Sysop=2
CoSysop=3
Friend=10
and Door Time as follows: Subscriber=30 minutes
Visiting Sysop=20 minutes
CoSysop=10 minutes
Friend=remaining call time
You would set the Individual "Games per Day" config entry to 1 and
the individual "Door Time" to 5 minutes (these would be the
default number of games and default Time for all Security Levels
other than 20,30 or 40... make them any number you want). Next you
would replace 4 of the Security Level entries as : 020=05/30
030=02/20
040=03/10
090=10/0
NON-STANDARD COM SUPPORT
________________________
Support for COM 1-4 on the standard IRQ's - COM1/COM3 = IRQ4 and
COM2/COM4 = IRQ3. If you wish to use a non-standard IRQ, add the IRQ
number after the configuration filename. Let's assume your Door is
called FOOBAR and you want to use COM1 and IRQ5. The command line
passed to your Door would be:
FOOBAR FOOBAR.CFG /5
The /5 tells FOOBAR to use IRQ5 rather than the standard IRQ4 that is
normally used with COM1. No /x parameter is needed for the standard
IRQ's.
As an alternative, you may use an environmental variable on the command
line. To use the variable (following the example above), place a
SET IRQ=5 in the batch file used to bring up your BBS (you would need a
different IRQ number for each node). The command line would now look
like this:
FOOBAR FOOBAR.CFG /%IRQ%
This, in combination with the use of the environmental variables
described in the MULTI-NODE SETUP section will allow you to use one
batch file and one config file to run this door on all nodes.
MULTI-NODE SETUP
________________
All Sunrise Doors are Multi-Node capable. Each node must have the
ability to access a configuration file which will have its own system
file (DORINFOx.DEF, PCBOARD.SYS, DOOR.SYS, etc) defined on the first
line. There are 2 ways to accomplish this:
(1) Create a separate configuration file for each node. The only
difference between each file would be the location of the system
file for that particular node. For example, on my system there are 2
nodes and the first line of the config files would look like this:
NODE1: H:\PCB1\DOOR.SYS
NODE2: H:\PCB2\DOOR.SYS
Thus, if you have a 4 node BBS, you will need 4 configuration files.
(2) Use ONE configuration file for ALL nodes. This Door will recognize
the following PCBoard/WildCat! environmental variables:
PCBDIR (Directory containing the System file)
PCBDRIVE (Drive containing the System file)
WCNODEID (WildCat! Current Node)
Thus, the first line of the SINGLE configuration file, for this Door
would look like this:
%PCBDRIVE%%PCBDIR%\DOOR.SYS
or
C:\WC30\WCWORK\NODE%WCNODEID%\DOOR.SYS
NOTE: This option, as described, assumes that you are running PCB or
Wildcat software. The environmental variables are automatically
created by the software for each node.
HOWEVER, if you are running other BBS software you should be able
to set the variables EXACTLY as described below, for EACH node
(more than likely in each batch file you use to bring up EACH node):
PCBDRIVE=C:
^^^^^^^^^
PCBDIR=\NODE2
^^^^^^^^
Info with a carat (^) under it, MUST be typed as is. The rest
depends on your naming conventions.
This, in combination with the use of the optional environmental
variable described in the NON-STANDARD COM SUPPORT section, will
allow you to use one batch file and one config file to run this
door on all nodes.
ADOPT-A-DOOR
____________
Having been a Sysop for a number of years, I have had my share of problems
and frustrations getting financial support for my board's upkeep. A fellow
Sysop left a message on my board, not long ago, about a concept that was
being used by several boards around the country.
The concept, ADOPT-A-DOOR, allows a caller to register (ADOPT) a door. It
would be the same as sending in a donation, only this way it is earmarked
for registering a particular door. In a way, the user feels he/she is
"getting something in return". As a Door author I have decided to build
this concept into each of my Door programs. The concept replaces the
usual message "tell the Sysop to register this Door" we find in most
doors.
If the Door is unregisterd then a message appears on the opening screen
to that effect. After finishing or suspending a game, a message screen
is displayed about the ADOPT-A-DOOR concept. The message also tells the
caller to contact the Sysop to find out if there is any further details
to the ADOPT-A-DOOR concept. Some Sysops give extra D/L time, online
time, etc to callers that ADOPT-A-DOOR.
If the Door has been registered, either by the Sysop or other callers,
the names of those contributors will be displayed in the closing screen.
NOTE: If you want to display the names of the callers that contributed
to registering the Door, you must create an ASCII file called
ADOPT.SYS. You create it with an Editor or Word Processor. Enter
the name(s) of the contributors (one on each line, maximum of 5
entries, each a maximum of 30 characters long). This file must be
saved, in ASCII format, and placed in the Door directory.
LEGALITIES
__________
THIS SOFTWARE AND ACCOMPANYING MATERIALS ARE DISTRIBUTED "AS IS"
WITHOUT WARRANTY, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ANYONE INVOLVED WITH
THE CREATION AND PRODUCTION OF THIS PRODUCT BE LIABLE FOR INDIRECT,
SPECIAL, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF ANY USE THEREOF
OR BREACH OF ANY WARRANTY.
DISTRIBUTION
____________
You may make this file available for downloading from your BBS or you may
upload it to any BBS of your choice, provided that you do not make any
changes to the contents of the archive (ZIP file). The archive and its
individual contents may not be used by any service that charges any money
whatsoever, without the written permission of the author.
REGISTRATION
____________
Registration and the subsequent insertion of the registration number into
your configuation file, allows for the display of your BBS name on the
opening and closing screen as well as the reduction of a delay built into
the opening screen display along with the ability to change certain
values in the configuration file.
To register your copy of SURVEY, please fill out the registration form
(REGISTER.FRM) and mail it along with the registration fee to
the name and address on the form.
Once a door is registered, any changes to registration information (Sysop
name or BBS Name) will require the doors to be re-registered. Download or
File Request a file named CHANGE.FRM from our BBS, complete the form and
follow ALL instructions in the document!
Registration fees are subject to change at any time. The most current
registration form is always available on our BBS. You may download or
File Request REGISTER.FRM at any time.
Be sure to use the proper upper/lower case when filling in your name and
BBS name, as they MUST match the way you entered them in the configuration
file. ^^^^
Based upon information supplied on the registration form, I will pre-
register you on my BBS. You will then be able to call SUNRISE-80 and pick
up your registration number.
MISC
____
The latest version of SURVEY and other fine SUNRISE DOOR programs are
always available for download from SUNRISE-80 BBS and other fine BBS'
Remember, should you have any problems, questions or suggestions, be sure
to drop me a message on either of the aforementioned BBS', SmartNet (Sysops)
Rime (PCBhints, Common, Doors, Sysops) or FidoNet 1:133/410